Beiträge von adisan

That's exactly what it is.

I can confirm now, for everyone interested, that for Mokka X permanent power is surely on S/B02 and maybe on F10.
Also, I can confirm that Mio Smartbox II (in my opinion the best wiring kit as function related to price) really did the job of cutting-off voltage at selected value (in my case 12,2V). Also Samsung microSDXC EVO+ is a very compatible card, not only Transcend, but I DO NOT recommend Kingston (got multiple errors). Tested for more than 3 days, 24/24h.

I know how should be. I don't know if the electrician did it properly.. I'l check with a multimeter.
Thank you. Danke schon

Thank you. I wouldn't ever thought it would be so complicated to have a working dash cam...

Do you think this would be ok? http://uni-trend.com/productsd…uctsCateId=749&CateId=749

But, i don't know how, the dashcam is working. Should I better buy a multimeter?

It's one wire connected!

Hello, I don't know what the electrician did...
Now, on my Mokka X, the yellow (BAT) wire is on B02 (spare fuse) and red (ACC) wire is on F17 (spare fuse). If I pull out any of the wires, the dash cam is not working (either with ignition on or off). It works only with both wires plugged. This is the way hardwire kit works? It wouldn't work with permanent fuse only (BAT) when ignition off, or only with the other wire (ACC) when ignition on? There have to be both wires connected to get the hardwire kit working?
Attached fuse panel (from book and photo).
Thanks for support!

Good idea, thanks. I'll try this!

I don't have a multimeter...
For hardwiring (parking mode) I've bought aMio MiVue Smart Box II (voltage cut-off at 12,2V):